Resource allocation in an asymmetric technology race with temporary advantages

We consider two opponents that compete in developing asymmetric technologies where each party's technology is aimed at damaging (or neutralizing) the other's technology. The situation we consider is different than the classical problem of commercial R&D races in two ways: First, while in commercial R&D races the competitors compete over the control of market share, in our case the competition is about the effectiveness of technologies with respect to certain capabilities. Second, in contrast with the “winner‐takes‐all” assumption that characterizes much of the literature on this field in the commercial world, we assume that the party that wins the race gains a temporary advantage that expires when the other party develops a superior technology. We formulate a variety of models that apply to a one‐sided situation, where one of the two parties has to determine how much to invest in developing a technology to counter another technology employed by the other party. The decision problems are expressed as (convex) nonlinear optimization problems. We present an application that provides some operational insights regarding optimal resource allocation. We also consider a two‐sided situation and develop a Nash equilibrium solution that sets investment values, so that both parties have no incentive to change their investments. © 2012 Wiley Periodicals, Inc. Naval Research Logistics 59: 128–145, 2012     

火灾隐患成因与整改对策研究

出于不同目的,火灾隐患有不同的分类方法。从行政干预、社会消防法制意识、消防技术规范的变化、经济建设与消防安全的关系等方面分析了火灾隐患的成因,探讨了制约火灾隐患整改的主要因素。从建立健全消防法规体系、充分运用市场手段、推动火灾隐患整改社会化等方面详细论述了火灾隐患的整改措施。     

摩擦条件对纳米铜润滑添加剂减摩性能影响的研究

研究了摩擦速度、载荷和摩擦表面处理方式等摩擦条件,对纳米铜润滑添加剂减摩性能的影响,发现摩擦速度较高时,载荷增加使摩擦因数明显降低;在低载荷时摩擦速度的减小,使摩擦因数降低了17%,载荷增大后摩擦速度的变化,对摩擦因数的影响减小.摩擦表面抛光处理,使摩擦因数降低为磨削处理时的74%.     

装甲车辆工况监测参数的选择

为提高装甲车辆工况监测工作的规范性和可操作性,文章在对典型的履带式装甲车辆状态监测参数及技术性能检验方法的研究和分析的基础上,提出了在工况监测过程中,监测参数的选择方法和依据,并提出了典型的装甲车辆各机械系统工况参数。     

An efficient SPH methodology for modelling mechanical characteristics of particulate composites

Particulate composites are one of the widely used materials in producing numerous state-of-the-art components in biomedical, automobile, aerospace including defence technology. Variety of modelling techniques have been adopted in the past to model mechanical behaviour of particulate composites. Due to their favourable properties, particle-based methods provide a convenient platform to model failure or fracture of these composites. Smooth particle hydrodynamics (SPH) is one of such methods which demonstrate excellent potential for modelling failure or fracture of particulate composites in a Lagrangian setting. One of the major challenges in using SPH method for modelling composite materials depends on accurate and efficient way to treat interface and boundary conditions. In this paper, a master-slave method based multi-freedom constraints is proposed to impose essential boundary conditions and interfacial displacement constraints in modelling mechanical behaviour of composite materials using SPH method. The proposed methodology enforces the above constraints more accurately and requires only smaller condition number for system stiffness matrix than the procedures based on typical penalty function approach. A minimum cut-off value-based error criteria is employed to improve the compu-tational efficiency of the proposed methodology. In addition, the proposed method is further enhanced by adopting a modified numerical interpolation scheme along the boundary to increase the accuracy and computational efficiency. The numerical examples demonstrate that the proposed master-slave approach yields better accuracy in enforcing displacement constraints and requires approximately the same computational time as that of penalty method.     

Numerical simulation of warhead transportation

The new numerical approach for analysis of the warhead transportations is suggested.This approach allows to control the warhead operability before its experimental analysis.The approach is implemented by the adequate models for the software ANSYS.Analysis of the loads at land operations and trans-portations of the warhead by natural roads,water and aviation allows to obtain the maximal values of loads,which are used in numerical simulations of the warhead.These loads give an opportunity to analyze the operability and the fatigue strength of the cartridge warhead.The numerical simulations of the attachments of the warhead combat elements are performed on the basis of the suggested method.The data of the numerical simulations verifies the operability of the fastener system of the warhead combat elements.     

基于动态神经网络的装备技术状态预测模型

装备的技术状态受多种因素的影响,诸多影响因素之间是一种多变量、强耦合、非线性的关系,同时这种关系还是动态的。根据装备技术状态的特性,使其在相空间里重构,然后利用动态神经网络建立装备技术状态预测模型,并以装备振动信号预测为例进行案例研究,验证了利用动态神经网络进行预测的可行性和优越性。     

大区域防空的进化群决策机制研究

大区域防空所涉及的区域广阔,因素众多,其作战计划的制定比较复杂。为解决此问题,提出了一种基于改进德尔菲法的具有进化学习功能的群决策机制,得到了纳什均衡解,使作战方案的制定更加合理,有助于防空作战效能的提高。     

喷水推进器功率特性与航速相关性研究

通过对某船喷水推进系统的分析,研究了喷水推进器的功率特性(功率与转速的关系)与航速的关系.先由喷水推进动力学方程引出喷水推进器功率特性在喷水推进系统稳态特性和动态性能研究中的作用,然后分析了KaMeWa71SⅡ喷水推进器的转速特性,将转速特性变换成力矩特性后,分析了该力矩特性,并将其与螺旋桨相应特性作了对比.根据转速特性获得的3个不同航速下的喷水推进器功率与转速的关系曲线,分析了航速对功率特性的影响,同时也将其与螺旋桨的相应特性曲线作了对比.研究所得出的结论是:喷水推进器的功率特性不是唯一的,装船之后它的功率特性受航速影响,但这个影响不像螺旋桨那么显著.据此推得,喷水推进系统在“船—泵—机”的匹配设计以及实际使用中,主机一般不会超负荷.     

基于LabVIEW的变速箱状态检测系统

采用门限关联度理论进行变速箱状态检测,并构建了以虚拟仪器为核心的变速箱状态采集系统,建立了表征变速箱状态的特征参量和正常故障判定准则,采用LabVIEW开发了检测与故障判定软件系统。